It is currently Mon Dec 17, 2018 1:05 pm


BC-Midi-LFO-Register-Seq [XITE-1]

Where to share your BC Modular creations
  • Author
  • Message
Offline

Spielraum

  • Posts: 51
  • Joined: Sun Apr 20, 2014 3:49 pm

BC-Midi-LFO-Register-Seq [XITE-1]

PostThu May 08, 2014 10:04 pm

patch: SE-BC-Midi-LFO-Register-Seq 1x.mdl ...because mdl more content stores :wink:
host-shell: BCmodular_v0975b
system: scope 5.1 on winXP SP3 x86
sample-layer: The Sample Collection (STS) ...the original you will not recognize :D , it is a homage to 18years cw/slc, no old iron!!
YOU DO NOT ALWAYS YOUR 25TB KONTAKT- or HALION-LIBRARY :wink:
story: ...when you love skrillex
compatible with XITE-1: YES
download: http://forums.planetz.com/viewtopic.php?f=15&t=32913
example: http://www.beatport.com/release/crossfader-kill/848742

note:
- not forget, preset in your presetfolder, sample-layer in your samplefolder
tested i.o.

but:
1.) i do not understand:
- "STS-Osc" with his offset-env´s and can´t gate-trigger, must converted to midi?
- "Multi-MO" concept pitch+value to Note? where are the GateIn to note on/off (only click´s when connected)?
-> wolf´s "value2note" does it ;)

2.) can not 100% save in host-shell-preset, therefore outsourced:
- "octamix" inserts not save and no pan for auxreturn
- "patchmodule" only save over pipe-controller

3.) can not save in host-shell-preset, therefore replaced:
- "dynamicmixer"
- "noteseg sync" ,,,only over pipe?

solution suggestions welcome!
...many many thanks+respect to sharc, CWmod, schroomz and last but not least SlC :!:
have fun!
cheers
ron
Attachments
SE-BC-Midi-LFO-Register-Seq 1x (Scope_BCmodular_v0975b).PNG
SE-BC-Midi-LFO-Register-Seq 1x (Scope_BCmodular_v0975b).PNG (828.7 KiB) Viewed 4131 times
Offline
User avatar

sharc

Site Admin

  • Posts: 589
  • Joined: Thu Apr 11, 2013 12:02 pm

Re: BC-Midi-LFO-Register-Seq [XITE-1]

PostSat May 10, 2014 9:42 pm

Thanks for sharing Ron. I don't have Flexor or ModIV so can't try out either of your patches unfortunately, but they look good :D

Spielraum wrote:i do not understand:
- "STS-Osc" with his offset-env´s and can´t gate-trigger, must converted to midi?


The gate output from Roy's sequencer is a sync signal and when converted to async STS OSC A & B seem to ignore it for some reason. I'll have a look to see what the problem is with those.
In the meantime you can use STS OSC C / D / E with the Sequencers. The Note output needs converted via a control curve (see attachment) or you could probably use a Sample PitchMod A module with a constant val for the Note instead :)

StepSeqSTS.zip
(553.14 KiB) Downloaded 300 times


Spielraum wrote: "Multi-MO" concept pitch+value to Note? where are the GateIn to note on/off (only click´s when connected)?
-> wolf´s "value2note" does it ;)


The multi-mo is designed to generate a number of MIDI message types including note on/off by feeding it with a pair of values for the Data1 & Data2 bytes.

It's not a dedicated value to note module so doesn't have a gate input. The gate signal would need converted to feed it into the Multi-Mo as the correct values for note on velocity / note off.

Spielraum wrote:2.) can not 100% save in host-shell-preset, therefore outsourced:

...3.) can not save in host-shell-preset, therefore replaced:


I'm assuming this is a problem with those 3rd party modules and not the BC Modular shell. Is that correct ? Do you have the same problems in Modular IV ?

Spielraum wrote: "patchmodule" only save over pipe-controller


I'm not sure what you mean here Ron. Can you please explain in more detail ?
Offline

Spielraum

  • Posts: 51
  • Joined: Sun Apr 20, 2014 3:49 pm

Re: BC-Midi-LFO-Register-Seq [XITE-1]

PostSun May 11, 2014 1:06 pm

hello simon,
thx for the sts-example to learn more about this cool OSC´s.
where i can reset the shell voices?
device-bar: -
shell min: 1
i need this 0-dsp feature when shell only clipboard

...ok, let´s do it...

> "STS-Osc"
i had check this, because the STS x000 have a big BUG since its birth!
when "voice stealing" than crack it very loud, it´s not cool, when i play piano only with a few voices...
the bug is unfortunately also with the OSC's :(
:idea: ? idea:
- when layer not found, then display the path when mouse over
- layer-preset-management

> "Multi-MO"
midi-note need gate on/off; val1 pitch; val2 vel --> thats 3 inputs
i´v test it with 2 modules+merge and with tried messing around a lot, but unfortunately no solution found...
ok, i can use "val2note", but i´m also thinking of user without wolf-modules...

> "100% save in host-shell-preset_management"
module insert-test preset-management:
viewtopic.php?f=13&t=207

> "patchmodule"
my dream, when I load the device, then all last savrd settings should be called without submenus-presets, also the settings in the modules-popups without connected to the outside.. This can otherwise confuse quickly.
regard
ron

Return to BC Modular Patches

Who is online

Users browsing this forum: No registered users and 3 guests

cron